|
|
- converted printks to dev_xxx
- removed messages in excess
Signed-off-by: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Richard Purdie <rpurdie@xxxxxxxxx>
---
drivers/rtc/rtc-sa1100.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
--- linux-rtc.orig/drivers/rtc/rtc-sa1100.c 2006-03-29 03:15:58.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-sa1100.c 2006-03-29 03:15:58.000000000 +0200
@@ -160,19 +160,19 @@ static int sa1100_rtc_open(struct device
ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, SA_INTERRUPT,
"rtc 1Hz", dev);
if (ret) {
- printk(KERN_ERR "rtc: IRQ%d already in use.\n", IRQ_RTC1Hz);
+ dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
goto fail_ui;
}
ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, SA_INTERRUPT,
"rtc Alrm", dev);
if (ret) {
- printk(KERN_ERR "rtc: IRQ%d already in use.\n", IRQ_RTCAlrm);
+ dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
goto fail_ai;
}
ret = request_irq(IRQ_OST1, timer1_interrupt, SA_INTERRUPT,
"rtc timer", dev);
if (ret) {
- printk(KERN_ERR "rtc: IRQ%d already in use.\n", IRQ_OST1);
+ dev_err(dev, "IRQ %d already in use.\n", IRQ_OST1);
goto fail_pi;
}
return 0;
@@ -332,7 +332,7 @@ static int sa1100_rtc_probe(struct platf
*/
if (RTTR == 0) {
RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
- printk(KERN_WARNING "rtc: warning: initializing default clock
divider/trim value\n");
+ dev_warn(&pdev->dev, "warning: initializing default clock
divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
RCNR = 0;
}
@@ -340,14 +340,11 @@ static int sa1100_rtc_probe(struct platf
rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
THIS_MODULE);
- if (IS_ERR(rtc)) {
+ if (IS_ERR(rtc))
return PTR_ERR(rtc);
- }
platform_set_drvdata(pdev, rtc);
- dev_info(&pdev->dev, "SA11xx/PXA2xx RTC Registered\n");
-
return 0;
}
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at www.tux.org/lkml/">http://www.tux.org/lkml/
|
|